This site uses cookies. By continuing to use this site you agree to our use of cookies. To find out more, see our Privacy and Cookies policy.
Skip to the content

IOP A community website from IOP Publishing

Company details

CVI Melles Griot Jun 13, 2008

About this company

CVI Melles Griot

We get you what you need, when you need it. We provide the high-tech toolkit that researchers use to build, assemble, and study their nanotechnology projects.


Products from this company

  1. Integrated 2-Watt Broadband Power and Energy Meter System Jun 24, 2008

    The integrated 2-watt broadband power and energy meter is a high-sensitivity...

  2. Gradient-Index Lenses Jun 24, 2008

    Gradient-index (GRIN) lenses combine refraction at the plane end surfaces with continuous...

  3. Nd:YLF Laser Mirrors - YL Jun 24, 2008

    The YL Series of Nd:YLF laser line mirrors utilize durable, dielectric coatings to achieve both...

  4. Nd:YAG 1064 nm and 532 nm - HM Jun 24, 2008

    HM dielectric wavelength mirrors are designed for high reflectivity and durability at both Nd:YAG...

  5. Diode Pumped Resonator Mirrors - DPY, DPYL Jun 24, 2008

    Diode pumped cavity optics require high reflectance at 1053 nm or 1064 nm and transmission...

  6. Nd:YAG Laser Mirrors - Y Jun 24, 2008

    The Y Series of Nd:YAG laser line mirrors utilize durable, dielectric coatings to achieve both...

  7. Low Loss Nd:YAG Laser Mirrors - Y1S Jun 24, 2008

    The Y1S Low Loss Nd:YAG laser line mirror utilizes a durable coating to achieve both very high...

  8. Ti:Sapphire Mirrors - TLMB Jun 24, 2008

    Traditional high damage mirrors are limited in bandwidth...

  9. Fiber Laser Mirrors - FLM Jun 24, 2008

    This line of laser mirrors have been specifically developed for use with fiber lasers...

  10. Broadband Mirrors - TLM2 Jun 24, 2008

    The TLM2 mirrors are specially designed to achieve high reflectivity and low dispersion for...

  11. Bandpass Interference Filters Jun 24, 2008

    Individual bandpass interference filters are available for all important wavelengths from...

  12. Long- and Short-Pass Filters Jun 24, 2008

    Our long- and short-pass filters, also called edge filters, have sharp cutoff transitions...

  13. Cell Holders Jun 23, 2008

    There are two types of cell holders: post mount and side-loading...

  14. Iris Diaphragms Jun 23, 2008

    These two iris diaphragms mount in the 07 HOC-series sideloading cell holders.

  15. Gradient-Index Lens Holders Jun 23, 2008

    The gradient-index lens holder is designed to be mounted in 16-mm cell holders.

  16. Pinhole/Slit Holder Jun 23, 2008

    Unmounted 9.5-mm-diameter precision pinholes or slits can be mounted in this 16-mm-diameter cell.

  17. Spherical Ball Lens Holders Jun 23, 2008

    The spherical ball lens holders are designed to be mounted in 16-mm cell holders.

  18. Fiber-Chuck Holder Jun 23, 2008

    With this holder, fiber chucks can be mounted into any 16-mm-diameter cell holder.

  19. Optical Component Holders Jun 23, 2008

    We make a variety of optical component holders designed to mount 12.5-mm (0.5-inch) and...

  20. Optical Component Cells Jun 23, 2008

    These cells are designed to hold lenses and other components for easier handling while mounting.

  21. Miniature Two-Axis Positioner for Optical Component Cells Jun 23, 2008

    Two-axis positioner allows 16-mm-diameter cell-mounted components to be aligned in the y-z plane.

  22. Laser Holder for 32-mm-Diameter Lasers Jun 23, 2008

    This mount is designed to hold 32-mm-diameter diode or helium neon lasers.

  23. V-Groove Fiber Holder Jun 20, 2008

    The CVI Melles Griot V-groove fiber holder is ideal for securing bare optical fibers.

  24. Miniature Filter Holder Jun 20, 2008

    This filter holder is designed to hold any flat optical component less than 4 mm in thickness.

  25. Microcomponent Holder Jun 20, 2008

    This mount is designed to hold optical fibers, gradient index lenses or prisms.

  26. Microscope Objective Holders Jun 20, 2008

    Microscope objectives are frequently used as focusing lenses in laser systems.

  27. Polarizer Holders Jun 20, 2008

    Polarizer holders are available for rotating either one or two polarizers.

  28. Miniature Universal Lens Holder Jun 20, 2008

    Optical components in a diameter range of from 5 to 15 mm can be mounted in this holder.

  29. Prism/Tilt Table with Rotation Jun 20, 2008

    This tilt table is ideal for aligning prisms and cube beamsplitters.

  30. Kinematic Tilt Mount and Accessories Jun 20, 2008

    This kinematic tilt mount provides smooth adjustment over an angular range of 85 degrees.

  31. Adjustable-Angle Post Connector Jun 20, 2008

    These connectors allow two posts to be mounted at any angle with respect to one another.

  32. Right-Angle Post Connector Jun 20, 2008

    Two posts can be mounted @ 90 degrees with respect to one another using right-angle post connectors.

  33. Pillar Mounting System Jun 20, 2008

    Provide a stable mounting platform that can be positioned anywhere on a table or breadboard surface.

  34. Post Holders and Accessories Jun 20, 2008

    Providing a simple method of adjusting the height & angular orientation of 4- & 8-mm-diameter posts.

  35. Mounting Posts and Accessories Jun 20, 2008

    Posts are available in two standard diameters: 4 mm and 8 mm. They can be joined end to end.

  36. Miniature Goniometers Jun 20, 2008

    Goniometers allow partial rotation of a mounted optical component about an axis at a fixed height...

  37. Miniature Rotation Stages Jun 20, 2008

    These products combine a full 360-degree range with 18-arc-sec. resolution in a single compact unit.

  38. Low-Profile Tilt Stage Jun 19, 2008

    Products provide tilt about two orthogonal axes parallel to a 25 x 25-mm mounting platform.

  39. Adjustable-Angle Swivel Post Connectors Jun 19, 2008

    A cost-effective way to post-mount components that require both variable position and angle.

  40. Double-Slot Mounting Bases Jun 19, 2008

    There are two double-slot mounting bases, one for M2-threaded breadboards and one for ¼-20- ...

  41. Single-Slot Mounting Base Jun 19, 2008

    This mounting base allows an M4-threaded post holder or other component to be mounted anywhere on...

  42. Slotted Mounting Base with Rotation Jun 19, 2008

    This slotted mounting base, with an integral rotation platform, can be used to position...

  43. Spacer Plates Jun 19, 2008

    These products can be stacked to raise a component’s axis to line up with that of other components.

  44. Miniature Optical Breadboards Jun 19, 2008

    Standard optical breadboards & tables are appropriate for large components, however miniature...

  45. Optical-Rail Systems Jun 19, 2008

    One-sided optical rails are available in four lengths: 50, 100, 250, and 500 mm.

  46. Miniature Gimbal Mirror Mount Jun 19, 2008

    This gimbal mirror mount provides ±2.5 degrees of precise angular adjustment about two orthogonal...

  47. Precision Flexure Mirror/Optic Mount Jun 19, 2008

    This mount has three high-precision adjusting screws which allow ±2 degrees of tilt when just one..

  48. Slotted Component Holder Bases Jun 19, 2008

    Two versions of the slotted component holder base are available...

  49. Vertical Translation Stage Jun 18, 2008

    This compact product provides 5 mm of linear vertical adjustment to a 25 x 25-mm mounting platform.

  50. Integral x-y-z Translation Stage Jun 18, 2008

    Providing 6 mm of adjustment in two orthogonal axes parallel to a 25 x 25-mm mounting platform ...